Cut Chenille Machine

Model Number

KG-601

The KG-601 Cut Chenille Machine is an improved version of the ON-221 frame of which more than 350 have already been installed in japan and other countries. The KG-601 is an extremely efficient frame using a one motor per spindle design and manufactured for extreme durability. It is particularly suited to the production of fine count chenil yarns requiring good percision. Spindle speed can be increased up to the greater than On-221, and the 12 spindles of the On221 have been increased to 20 spindle on the KG-601, thereby doubling the capacity of each single frame. An inverter is standard equipment, making immediate adaptation to all yarn types possible. A yarn breakage stopper has also been included to enable fully automatic. Unmanned operation.

Features

• The floating thred prepared on the creel is wold onto a triangular gauge by the rotation of the flyre. The wound floating thread is wound to the base of the gauge along the taper of the gauge. The wound floating thread is then fed out by a feed roller. At this time, the floating thread is cut cut by knives located between the two feed rollers. Cut into two pieces, each part of the floating thred is sandwiched between two yarns, twisted by the traveller, and fixed.

Production

• The back side machine floating prepared effect yarn, the wound on to a triangular gauge by the rotation of the flyer taper gauge the wound thread is cut by knife located. Then fed out by feed rollers this cuted yarn(two core yarn) twisted of by the traveller ring fixed bobbin by the traverse take-up motion. This name is Cut Chenille Machine.

Specification